Product Details:
|
Machine Name: | Pine Nuts Shelling Machine | Capacity: | 30-40kg/h |
---|---|---|---|
Power: | 2.6 KW | Shelling Rate: | 98% |
Weight: | 460Kg | Dimension: | 3200*1000*1900 Mm |
High Light: | peanut skin peeling machine,black walnut hulling machine |
Pine Nuts Shelling Machine for Pinecone Lebanese Pinoli Nut Pineal
Our company has the production experience of professional mature pine nuts to handle one line.
Pine nuts processing steps: 1, pine fruit thresher, 2 to remove impurities, 3, according to the size of the grade, 4, shelling, 5, shell kernel separation, 6, drying, 7, peeling, 8, baking (or other Deep processing
Product features and function description
1. The new structure improved by our company many times, with good mechanical stability and low noise;
2. Pine nuts shelling machine is compact, easy to assemble and disassemble, easy to repair;
3. Higher shelling rate, less broken particles, high precision, 98% of the shelling and shelling rate, 96% completeness, self-adjustment according to the size of the material, the design structure, the circulation shelling, and the unopening The shelling is automatically, sieved, loaded, re-opened, and the shell is separated from the different material outlets.
Pine nuts shelling machine is suitable for large, medium and small processing plants and other enterprises.
Technical Parameters
TYPE | CAPACITY | POWER | WEIGHT | SIZE |
TK-SZ | 30-40kg/h | 2.6KW | 460KG | 3200*1000*1900mm |
The pine nut sheller can be used alone or in combination with a production line.
When using a single machine: first take off the large pine nuts, then adjust the gap and then take off the small level of pine nuts, and cycle, until all the specifications of the pine nuts are unshelled. The gap between the rolls should be 1-1.5 mm smaller than the size of the loose pieces. For example, the raw material size of pine nuts is 15 mm in diameter of large pine cones, 12 mm in diameter, and 9 mm in diameter. The materials are adjusted according to the raw materials: the first stripping gap is 14 mm, and the second is removed. The clearance of 11 mm in the gap is completed, and the gap of the third stripping is 8 mm, which is completely removed. In practical applications, the gap should be adjusted according to the raw material to achieve the best effect of the shelling of the nuts and the breaking of the nuts. At the same time, each time a level of pine nuts is unshelled, it is necessary to replace the corresponding sieve.
Contact Person: Amos
Tel: +8615093356932