|Product Name:||Automatic Pecan Sheller||Material:||Carbon Steel|
|Production Capacity:||300-400kg/h||Warranty:||1 Year|
almond shell cracking machine,
black walnut hulling machine
TK-HT Automatic commercial walnut sheller electric walnut pecan sheller
Automatic pecan sheller is mainly used for hard shelling of walnuts. The yield and the integrity rate of nuts are different depending on the variety of walnuts. Automatic pecan sheller has two structures. One structure is to adjust the speed of the motor so that the speed is fast and the internal wind is suitable. The other is to achieve the best shelling effect by adjusting the internal clearance. The machine feeds from the top and is unpacked and discharged through the machine. The design considers factors such as energy saving, environmental protection, high efficiency, and good quality, and meets the characteristics of “high efficiency, high quality, low consumption, safety, health and environmental protection” of advanced agricultural machinery. The sorting requirements of the processed walnuts are not high, and the pecans after the initial screening can be processed; the shell is broken by the principle of mechanical eccentric shaft; the equipment is adapted to different varieties of walnuts. The production efficiency is nearly 20 times higher than the manpower, the shell breaking rate is ≥99%, and the breaking rate and the unbroken shell rate are less than ≤1%.
The mechanized production method in the whole food processing process reduces the possibility of direct contact with workers and raw materials processed, avoids secondary pollution during processing, and improves food hygiene indicators.
Parameter of automatic pecan sheller
Complete rate: 70%
Material: carbon steel
1. First check if the connections and transmission parts are loose and if there are any abnormalities.
2. The power supply and electrical device terminals are in good contact.
3. The roller gap has been adjusted before leaving the factory. Because the size of the walnut is different, the size of the gap is adjusted according to the size of the fruit shape.
4. Clearance adjustment:
The small machine is: the top of the intermediate shaft has two nuts that lock each other, loosen the twisted middle shaft nut, roll the upward adjustment gap, and the bigger the broken shell, the smaller the lower gap becomes smaller, the smaller the shell is, and then adjusted. Re-lock the two nuts to each other. Because the walnut varieties vary in size and shell thickness, a small amount of walnuts is put into the boot to see the size effect after shelling. When the shell is too large, the gap is small; Adjust about 5 mm at a time;
Large machines are: speed control speed, the faster the speed, the smaller the shell, the slower the shell is. Because the walnut varieties are different in shell thickness, a small amount of walnuts is put into the boot to see the shelling effect. By adjusting the speed, the high integrity rate and the size effect after shelling are achieved. The small fruit is unshelled and then removed again after the re-adjustment gap. When the shell is too large, the speed is adjusted fast; Adjust about 50 revolutions at a time.
Contact Person: Amos